1 inch aluminum handlebar CLUBMAN® with slotted hole



The right inch handlebar for sporty riding. With slotted hole for concealed cable routing
Special price only applies while stocks last.

Availability will be checked
Please wait a short moment

SKU: 162AS014 Category:


1 inch (25.4mm) aluminum handlebars from LSL

LSL stands for outstanding handlebar quality. This is due to the company’s own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades.

As the only handlebar manufacturer in Europe, LSL also offers variants with an outer diameter of 25.4 mm (1 inch) in its aluminum handlebar range. LSL thus covers the demand for sporty handlebar types. These handlebars are reinforced on the inside in the clamping area and achieve extraordinary stiffness despite the low weight typical of aluminum.

With a continuous outer diameter of 25.4 mm, the wall thickness at the handlebar ends is 4 mm (17.4 mm inside). The surface is matt bead-blasted or high-gloss polished and available in different anodized colors depending on the handlebar type.

The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.
We recommend using an LSL drilling template to transfer the position of the drill holes from the standard handlebars in the best possible way.

All LSL handlebars are supplied with ABE.
The range of models is huge and is expanded every year with new entries.
The ABE reliably documents which handlebar type fits and is approved for the motorcycle.

As a rule, the assignments in the ABE are without conditions.
However, there are also exceptions.
So take a look at the entry for your motorcycle in the ABE.
If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.

Scope of delivery: 1 piece

Care instructions:
– Only use acid- and alkali-free cleaner for all handlebars and their surface variants!
– Never use in direct sunlight and do not allow the cleaner to dry out.
– Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc.; immediately absorb any dripping with a soft cloth.
– Test the compatibility of cleaning agents on an inconspicuous area before use!
– No guarantee or warranty in the event of improper cleaning and care.

Additional information


gold, silver matt







expert report



product brand


vehicle brand


inside diameter